Results For "

ztw 60a esc

": 47 Products Found

5.2V-12V ZTW UBEC 30A HV External Switching BEC 3S-18S Helicopter ESC Controller

The ZTW UBEC 30A HV is a high-current external switching BEC with 3-18S main and 1-2S backup inputs, delivering 30A continuous and 60A peak. Selectable 5.2V/6V/7.4V/8.4V/9V/12V output via DIP switch, 8-channel parallel outputs, metal housing, external switch, and full protection

ZTW BX 80A 4-in-1 AM32 ESC 4S-8S 7kg Payload for 10–13The ZTW BX-80A 4-in-1 AM32 ESC

The ZTW BX-80A 4-in-1 AM32 ESC handles 80A continuous per channel on 4-8S, rated for 7kg payload and 7–10 inch frames. With a 120MHz processor, bidirectional DSHOT, and dual 2200µF capacitors, it powers long-range, cinematic, and light industrial multirotors with confidence.

IP67 ZTW ESC 300A Waterproof ESC 10S-20S ESC Marine Propulsion

The ZTW Dolphin 300A HV OPTO IP67 waterproof ESC delivers 300A continuous and 1200A burst current on 10-20S LiPo. At 160×110×39.5mm and 1143g with 6-gauge wiring, 5V/1A BEC, optocoupler isolation, and full IP67 waterproofing for extreme subsea propulsion.

100A ZTW Shark G2 ESC Waterproof 4S-6S 8A SBEC 100A Speed Controller

The ZTW Shark G2 100A is a 32-bit waterproof ESC delivering 100A continuous and 120A burst on 4-6S LiPo. With splash-proof glued design, flat water cooling, 5V/6V 8A SBEC, synchronous rectification, forward/reverse modes, and separate control/power boards for high-power RC boats.

Dolphin 100A FOC HV OPTO Waterproof ESC ZTW 6S-14S For Precision Underwater ROV

The ZTW Dolphin 100A FOC HV OPTO waterproof ESC delivers 100A continuous and 120A burst on 6-14S LiPo with field-oriented control and optocoupler isolation. At 106×53×30mm and 597g, it features parameterless programming, shielded cable, and full waterproofing for subsea thrusters

ZTW BX 30A 4 in 1 AM32 ESC 3S-6S Bidirectional DSHOT for 2–4 Inch FPV Drone

The ZTW BX-30A 4-in-1 AM32 ESC is built for 2–4 inch micro FPV drones, pairing a 120MHz AT32F421 processor with bidirectional DSHOT300/600 and Betaflight RPM filtering for ultra-low noise. At just 7g with a 20×20mm mounting footprint, it delivers smooth, precise throttle in a fea

AM32 ZTW BX 100A 4 in 1 ESC 4-8S 10kg Payload for 13–15 Inch Heavy-Lift FPV Drone

The ZTW BX-100A 4-in-1 AM32 ESC is the high-current standard-voltage flagship, delivering 100A continuous per channel on 4-8S with a 10kg payload rating for 13–15 inch heavy-lift and cinematic drones. 120MHz processing, bidirectional DSHOT, and 8AWG power leads make it ready for
Previous
Page 3 of 3
Next