ZTW Seal 70A SBEC G2 Waterproof ESC 3S-6S RC Boat ESC For Marine Propulsion
The ZTW Seal 70A SBEC G2 is a 32-bit 170MHz waterproof ESC delivering 70A continuous and 80A burst on 3-6S LiPo. With IP67 rating, dual water cooling, 8A adjustable SBEC, forward/reverse modes, telemetry, and APP/LCD programming for RC boats and small underwater thrusters.
ZTW Seal 70A SBEC G2 32-Bit Waterproof ESC 3-6S with Water Cooling for RC Boats and Marine Propulsion
32-Bit 170MHz Processing Power
At the core of the Seal 70A G2 is a high-performance 32-bit microprocessor running at 170MHz, delivering stronger computing ability and faster throttle response than 8-bit alternatives. Super smooth start-up and accurate throttle linearity make it ideal for sport RC boats, electric surfboards, and small underwater thrusters.
70A Continuous / 80A Burst on 3-6S
Built with next-generation MOSFETs that generate low heat and withstand instant current surges, this ESC delivers 70A sustained and 80A peak on 3-6S LiPo — matching the most common battery configurations in recreational and light commercial marine use.
IP67 Waterproof with Dual Water Cooling
Rated IP67, the fully sealed enclosure handles full water immersion. Two integrated water-cooling pipes combined with customized heat sinks provide efficient heat dissipation, keeping the ESC cool during sustained high-throttle runs on the water.
8A Adjustable SBEC — No External UBEC
The built-in 6.0/7.4/8.4V switching BEC supplies 8A continuous, powering receivers and servos directly. Adjustable voltage matches high-voltage digital servos for precise steering and throttle control on RC boats.
Forward/Reverse & Freewheeling Modes
Two running modes — "Forward Only" for racing and "Forward and Backward" for scale boats and docking — plus freewheeling circuitry deliver higher driving efficiency and more energy-saving operation compared to ESCs without freewheeling.
Comprehensive Protection Suite
Start-up protection, over-temperature power reduction, low-voltage cutoff, signal loss, phase loss, over-current, abnormal power-on voltage, and over-load protection all come standard — protecting both the ESC and your boat in every scenario.
Telemetry, APP & LCD Programming
Real-time data returning (current, voltage, temperature, RPM, throttle, ESC status) viewable via ZTW App or LCD Program Card G2. Configure all parameters via Bluetooth app, LCD card, or transmitter stick — the same G2 ecosystem across the entire Seal lineup.

Technical Specifications
| Specifications | Seal 70A SBEC G2 | Seal 90A SBEC G2 | Seal 105A SBEC G2 | Seal 130A SBEC G2 | Seal 200A SBEC G2 |
|---|---|---|---|---|---|
| Continuous Current | 70A | 85A | 105A | 125A | 200A |
| Burst Current | 80A | 95A | 115A | 135A | 240A |
| Input Voltage | 3-6S LiPo | 3-8S LiPo | 3-8S LiPo | 3-8S LiPo | 4-8S LiPo |
| BEC Output | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 10A |
| CPU | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz |
| Water Cooling | Dual-Channel | Dual-Channel | Dual-Channel | Dual-Channel | Dual-Channel |
| Programming | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App |
| Firmware Upgrade | Supported | Supported | Supported | Supported | Supported |
| Waterproof | Yes | Yes | Yes | Yes | Yes |
| Power Wire | 14AWG | 12AWG | 10AWG | 10AWG | 10AWG |
| Motor Wire | 14AWG | 12AWG | 12AWG | 10AWG | 10AWG |
| Battery Plug | XT60 | XT90 (Amass) | XT90 (Amass) | XT90 (Amass) | None (Solder) |
| Motor Bullet | 3.5mm Gold | 4.0mm Gold | 4.0mm Gold | 4.0mm Gold | None (Solder) |
| Size (L×W×H) | 64×38×26mm | 95×44×27mm | 95×44×27mm | 95×44×27mm | 106×52×30mm |
| Weight | 107g | 196g | 199g | 205g | 306g |