Quality 60F V1 6V-12V 25A Capacitor Battery Backup 3S HV Helicopter UAV ESC Capacitor factory
Quality 60F V1 6V-12V 25A Capacitor Battery Backup 3S HV Helicopter UAV ESC Capacitor factory
Quality 60F V1 6V-12V 25A Capacitor Battery Backup 3S HV Helicopter UAV ESC Capacitor factory
Quality 60F V1 6V-12V 25A Capacitor Battery Backup 3S HV Helicopter UAV ESC Capacitor factory

60F V1 6V-12V 25A Capacitor Battery Backup 3S HV Helicopter UAV ESC Capacitor

60F V1 6V-12V 25A Capacitor Battery Backup 3S HV Helicopter UAV ESC Capacitor
Product Name: Backup Capacitor 60F V1
BEC: 6V-12V (MAX 13V)
Signal Wires: 60C 150mm Brown/Red/Orange JR
Weight: 64g
Size: 73*48*19mm
Product Summary

The ZTW Backup Capacitor 60F V1 combines 60 farad reserve with a wide 6V-12V input (max 13V) for 3S and 12V BEC systems. Automatically powers receivers and servos on failure, 25A output, switch or throttle activation, in a 73×48×19mm, 64g package for large helicopters, scale airc

Product Description

ZTW Backup Capacitor 60F V1 6V-12V 25A High-Capacity Receiver Power Backup for 3S HV Helicopter, Large-Scale Aircraft and UAV

60F + 12V: Maximum Backup Capability

The 60F V1 pairs the highest capacitance in the lineup with the widest voltage range (6V-12V, max 13V), making it the top choice for large 3S-powered helicopters, 12V BEC jet models, and professional UAVs running high-voltage receiver systems.

Extended Safe-Landing Window

Sixty farads of reserve can power multiple HV digital servos for 60 seconds or longer, providing a generous window for autorotation, dead-stick landing, or controlled descent even on large, servo-heavy models.

Instant Fail-Safe Switchover

Automatically detects BEC or battery failure and switches to capacitor power within milliseconds, preventing receiver brownout or reboot that would cause loss of control.

25A Peak for Multi-Servo Loads

Handles up to 25A burst current to cover simultaneous deflection of multiple large servos — retracts, flaps, collective, and cyclic — without voltage sag.

Slim 19mm V1 Form Factor

The 73×48×19mm, 64g V1 chassis is thinner than the standard 60F (23mm), fitting more frame and fuselage layouts while still packing maximum capacitance.

Dual Control Modes

Supports transmitter-switch arming and automatic throttle-signal detection (50-600Hz), compatible with all major RC radio protocols.

Professional-Grade Power Redundancy

For commercial drone operators, industrial VTOL platforms, and serious scale pilots, the 60F V1 delivers the highest level of receiver power backup available in the ZTW accessory line — a low-cost insurance policy against total power loss.

Related Products

ZTW BX-120A Drone 4 In 1 ESC BLHeli-S 3S-8S DShot600 X8 10kg Payload Multirotor ESC
The ZTW BX-120A 4in1 ESC delivers 120A continuous and 140A burst per channel on 3-8S LiPo with BLHeli-S firmware and DShot600. Built on an upgraded 8-layer 4oz copper PCB in a 57×54×6.5mm, 25g package with XT90 and 30.5mm M4 mounting for 15 inch heavy-lift, X8, and multirotors up
BX-80A ZTW ESC 4 In 1 BLHeli-S 3S-8S DShot600 13 Inch FPV ESC For Cinelifter
The ZTW BX-80A 4in1 ESC delivers 80A continuous and 100A burst per channel on 3-8S LiPo with BLHeli-S firmware and DShot600. Built on a 6-layer 3oz copper PCB in a 57×54×6.5mm, 25g package with 30.5mm M4 mounting and XT90 connector for 13 inch FPV long-range, cinelifter, and mult
G2 120A ZTW Beatles SBEC ESC 4S-6S ESC Speed Controller For VTOL
The ZTW Beatles G2 120A is the flagship of the series, built for large-scale UAVs, heavy-lift multicopters, and high-power fixed-wing aircraft on 2-6S LiPo. 140A burst current, 10-gauge wiring, and an 8A SBEC for demanding industrial use.
G2 100A ZTW Beatles 4S-6S SBEC ESC Controller Adjustable BEC
The ZTW Beatles G2 100A ESC is the second-highest current option in the series, built for heavy-lift UAVs, large fixed-wing aircraft, and industrial platforms on 2-6S LiPo. 10-gauge power wiring and an 8A SBEC support demanding, sustained loads.