Water Cooling ZTW Seal ESC 90A SBEC G2 32 Bit ESC 3S-8S For RC Boats
The ZTW Seal 90A SBEC G2 is a 32-bit 170MHz waterproof ESC delivering 85A continuous and 95A burst on 3-8S LiPo. With IP67 rating, dual water cooling, 8A adjustable SBEC, forward/reverse modes, telemetry, and APP/LCD programming for mid-size RC boats.
ZTW Seal 90A SBEC G2 32-Bit Waterproof ESC 3-8S with Water Cooling for RC Boats and Marine Propulsion
32-Bit 170MHz for Precision Throttle Control
Powered by a 32-bit microprocessor at 170MHz, the Seal 90A G2 delivers lightning-fast computing and ultra-smooth throttle linearity. Whether navigating mid-size RC catamarans or light industrial subsea thrusters, the response is immediate and predictable.
85A Continuous / 95A Burst on 3-8S
Next-generation MOSFET technology ensures low heat generation and high reliability under instant current loads. With 85A sustained and 95A peak across a 3-8S range, this ESC unlocks higher top speeds for RC boat enthusiasts and more thrust for small commercial marine vehicles.
IP67 Waterproof + Dual-Channel Water Cooling
The IP67-rated sealed enclosure withstands full immersion, while two water-cooling pipes with custom heat sinks efficiently dissipate heat — a critical advantage for boats that run hard and ESCs mounted in confined motor boxes.
8A Adjustable SBEC for Servo-Heavy Setups
The 6.0/7.4/8.4V switching BEC delivers 8A, powering multiple standard servos on boats with dual rudder, trim tab, and reverse setups — no external UBEC required.
Forward/Reverse & Freewheeling
Switch between "Forward Only" racing mode and "Forward and Backward" for scale operation and docking. Freewheeling circuitry boosts driving efficiency and extends runtime by reducing parasitic drag when off-throttle.
Full Protection Suite
Over-temperature power reduction, low-voltage cutoff, start-up, signal loss, phase loss, over-current, abnormal voltage, and over-load protection safeguard your investment in every operating condition.
Telemetry & G2 Programming
Real-time telemetry (current, voltage, temperature, RPM, throttle, status) via ZTW App or LCD Program Card G2. Full parameter configuration through Bluetooth app, LCD card, or transmitter.

Technical Specifications
| Specifications | Seal 70A SBEC G2 | Seal 90A SBEC G2 | Seal 105A SBEC G2 | Seal 130A SBEC G2 | Seal 200A SBEC G2 |
|---|---|---|---|---|---|
| Continuous Current | 70A | 85A | 105A | 125A | 200A |
| Burst Current | 80A | 95A | 115A | 135A | 240A |
| Input Voltage | 3-6S LiPo | 3-8S LiPo | 3-8S LiPo | 3-8S LiPo | 4-8S LiPo |
| BEC Output | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 10A |
| CPU | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz |
| Water Cooling | Dual-Channel | Dual-Channel | Dual-Channel | Dual-Channel | Dual-Channel |
| Programming | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App |
| Firmware Upgrade | Supported | Supported | Supported | Supported | Supported |
| Waterproof | Yes | Yes | Yes | Yes | Yes |
| Power Wire | 14AWG | 12AWG | 10AWG | 10AWG | 10AWG |
| Motor Wire | 14AWG | 12AWG | 12AWG | 10AWG | 10AWG |
| Battery Plug | XT60 | XT90 (Amass) | XT90 (Amass) | XT90 (Amass) | None (Solder) |
| Motor Bullet | 3.5mm Gold | 4.0mm Gold | 4.0mm Gold | 4.0mm Gold | None (Solder) |
| Size (L×W×H) | 64×38×26mm | 95×44×27mm | 95×44×27mm | 95×44×27mm | 106×52×30mm |
| Weight | 107g | 196g | 199g | 205g | 306g |