3S-8S ZTW Seal ESC 130A SBEC G2 32 Bit Waterproof Large RC Boat ESC
The ZTW Seal 130A SBEC G2 is a 32-bit 170MHz waterproof ESC delivering 125A continuous and 135A burst on 3-8S LiPo. With IP67 rating, dual water cooling, 8A adjustable SBEC, forward/reverse, telemetry, and APP/LCD programming for heavy marine propulsion.
ZTW Seal 105A SBEC G2 32-Bit Waterproof ESC 3-8S with Water Cooling for Racing Boats and Industrial Thrusters
32-Bit 170MHz Flagship Low-Voltage Power
The Seal 130A G2 is the top-current 3-8S model, combining a 170MHz 32-bit processor with 125A continuous output for large RC boats, high-performance catamarans, and heavy industrial marine thrusters demanding maximum 8S power.
125A Continuous / 135A Burst with Next-Gen MOSFETs
Advanced MOSFET technology provides low heat, instant current withstand, and high reliability. 125A sustained and 135A peak drives the largest 8S-compatible motors with confidence for big-block boats and heavy-lift subsea thrusters.
IP67 Waterproof + Dual-Channel Cooling
Full IP67 waterproof construction with two water-cooling pipes and custom heat sinks ensures efficient heat dissipation even in the confined, hot motor boxes of large boats.
8A Adjustable SBEC for Complex Setups
6.0/7.4/8.4V switching BEC at 8A powers multiple high-torque servos for dual rudder, trim tab, and reverse setups — eliminating the need for an external BEC.
Forward/Reverse & Freewheeling Efficiency
Dual running modes for racing or scale operation. Freewheeling circuitry reduces off-throttle drag, improving overall efficiency and runtime.
Full Protection Suite
Over-temperature power reduction protects the boat from thermal damage. Plus LVC, start-up, signal loss, phase loss, over-current, abnormal voltage, and over-load protection.
Telemetry & G2 Programming Ecosystem
Real-time current, voltage, temperature, RPM, throttle, and status telemetry via ZTW App or LCD Program Card G2. Full programming via Bluetooth app, LCD card, or transmitter stick.

Technical Specifications
| Specifications | Seal 70A SBEC G2 | Seal 90A SBEC G2 | Seal 105A SBEC G2 | Seal 130A SBEC G2 | Seal 200A SBEC G2 |
|---|---|---|---|---|---|
| Continuous Current | 70A | 85A | 105A | 125A | 200A |
| Burst Current | 80A | 95A | 115A | 135A | 240A |
| Input Voltage | 3-6S LiPo | 3-8S LiPo | 3-8S LiPo | 3-8S LiPo | 4-8S LiPo |
| BEC Output | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 10A |
| CPU | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz |
| Water Cooling | Dual-Channel | Dual-Channel | Dual-Channel | Dual-Channel | Dual-Channel |
| Programming | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App |
| Firmware Upgrade | Supported | Supported | Supported | Supported | Supported |
| Waterproof | Yes | Yes | Yes | Yes | Yes |
| Power Wire | 14AWG | 12AWG | 10AWG | 10AWG | 10AWG |
| Motor Wire | 14AWG | 12AWG | 12AWG | 10AWG | 10AWG |
| Battery Plug | XT60 | XT90 (Amass) | XT90 (Amass) | XT90 (Amass) | None (Solder) |
| Motor Bullet | 3.5mm Gold | 4.0mm Gold | 4.0mm Gold | 4.0mm Gold | None (Solder) |
| Size (L×W×H) | 64×38×26mm | 95×44×27mm | 95×44×27mm | 95×44×27mm | 106×52×30mm |
| Weight | 107g | 196g | 199g | 205g | 306g |