60A ZTW Shark ESC G2 With 8A SBEC Light Underwater Thrusters 2-6S ESC
The ZTW Shark G2 60A is a 32-bit waterproof ESC delivering 60A continuous and 80A burst on 2-6S LiPo. With splash-proof glued design, flat water cooling, 5V/6V 8A SBEC, synchronous rectification, forward/reverse modes, and separate control/power boards for RC boats and underwater
ZTW Shark G2 60A 32-Bit Waterproof ESC 2-6S with Water Cooling and 8A SBEC for RC Boats and Light Underwater Thrusters
32-Bit 2-6S Versatility for Boats and Subsea
The Shark G2 60A steps up to 2-6S compatibility with a 32-bit processor, delivering faster response, smooth start-up, and precise throttle linearity — ideal for sport RC boats, fast catamarans, and lightweight industrial underwater thrusters.
60A Continuous / 80A Burst on 2-6S
New-generation MOSFETs ensure low heat and high reliability under instant current surges. 60A sustained and 80A peak across a 2-6S range unlocks higher top speeds for boaters and more thrust for small commercial subsea vehicles.
Splash-Proof + Flat Water Cooling
Waterproof-glued construction resists splash and spray, while the flat water-cooling system efficiently dissipates heat — suitable for both surface boat use and compact submerged thruster enclosures.
8A High-Power Adjustable SBEC
The upgraded 5.0/6.0V switching BEC delivers 8A continuous (burst up to 15A), powering multiple high-torque servos and auxiliary devices — no external UBEC needed for complex boat setups or small ROV electronics.
Synchronous Rectification Efficiency
Synchronous rectification dramatically reduces ESC heating, improving driving efficiency and saving battery energy — critical for extending both recreational run time and lightweight underwater mission duration.
Forward/Reverse & Separate Board Design
"Forward Only" and "Forward and Backward" modes cover racing and operational use. The isolated control-board/power-board layout improves EMI resistance and reliability by thermally separating control from power.
5-Layer Protection & Programming
Start-up, over-heat, LVC, phase loss, and signal loss protection. Configure via transmitter or LCD Program Card G2 (optional App adapter). Supports high-RPM motors. At 70×41×12mm and 65g, it remains remarkably compact for 6S capability.
Technical Specifications
| Specifications | Shark 20A SBEC G2 | Shark 30A SBEC G2 | Shark 40A SBEC G2 | Shark 50A SBEC G2 | Shark 60A SBEC G2 | Shark 80A SBEC G2 | Shark 100A SBEC G2 | Shark 120A SBEC G2 |
|---|---|---|---|---|---|---|---|---|
| Continuous Current | 20A | 30A | 40A | 50A | 60A | 80A | 100A | 120A |
| Burst Current | 30A | 40A | 55A | 65A | 80A | 100A | 120A | 140A |
| Input Voltage | 2-4S LiPo | 2-4S LiPo | 2-4S LiPo | 2-4S LiPo | 2-6S LiPo | 4-6S LiPo | 4-6S LiPo | 4-6S LiPo |
| BEC Output | 5.0/6.0V Adj. / 4A | 5.0/6.0V Adj. / 4A | 5.0/6.0V Adj. / 4A | 5.0/6.0V Adj. / 4A | 5.0/6.0V Adj. / 8A | 5.0/6.0V Adj. / 8A | 5.0/6.0V Adj. / 8A | 5.0/6.0V Adj. / 8A |
| Water Cooling | Yes (27mm Tube) | Yes (27mm Tube) | Yes (27mm Tube) | Yes (27mm Tube) | Yes (27mm Tube) | Yes (32mm Tube) | Yes (32mm Tube) | Yes (32mm Tube) |
| Programming | Tx / LCD Card G2 | Tx / LCD Card G2 | Tx / LCD Card G2 | Tx / LCD Card G2 | Tx / LCD Card G2 | Tx / LCD Card G2 | Tx / LCD Card G2 | Tx / LCD Card G2 |
| Firmware Upgrade | Not Supported | Not Supported | Not Supported | Not Supported | Not Supported | Not Supported | Not Supported | Not Supported |
| Power Wire | 18AWG | 16AWG | 14AWG | 14AWG | 14AWG | 12AWG | 10AWG | 10AWG |
| Motor Wire | 18AWG | 16AWG | 14AWG | 14AWG | 14AWG | 12AWG | 12AWG | 12AWG |
| Battery Plug | XT60 | XT60 | XT60 | XT60 | XT60 | XT90 | XT90 | XT90 |
| Motor Bullet | 3.5mm Gold | 3.5mm Gold | 3.5mm Gold | 3.5mm Gold | 3.5mm Gold | 4.0mm Gold | 4.0mm Gold | 4.0mm Gold |
| Size (L×W×H) | 60×33×10mm | 60×33×10mm | 69×33×9mm | 69×33×9mm | 70×41×12mm | 89×45×13mm | 89×45×13mm | 89×45×13mm |
| Weight | 32g | 36g | 45g | 45g | 65g | 98g | 105g | 105g |
Related Products
