Quality 35A SBEC G2 ZTW Mantis ESC 2-4S For 3D Aerobatic Sport Jet And EDF RC Airplane factory
Quality 35A SBEC G2 ZTW Mantis ESC 2-4S For 3D Aerobatic Sport Jet And EDF RC Airplane factory
Quality 35A SBEC G2 ZTW Mantis ESC 2-4S For 3D Aerobatic Sport Jet And EDF RC Airplane factory
Quality 35A SBEC G2 ZTW Mantis ESC 2-4S For 3D Aerobatic Sport Jet And EDF RC Airplane factory

35A SBEC G2 ZTW Mantis ESC 2-4S For 3D Aerobatic Sport Jet And EDF RC Airplane

35A SBEC G2 ZTW Mantis ESC 2-4S For 3D Aerobatic Sport Jet And EDF RC Airplane
Product Name: Mantis 35A SBEC G2
Continuous/ Burst Current: 35A/45A
Input Voltage: 2-4S LiPo
BEC Output: 5.0,6.0,7.4V Adjustable /4A
Size: 68.0*28.0*10.0mm
Weight: 40g
Programming Way: Transmitter/LCD Program Card G2/Android & IOS APP
Product Summary

The ZTW Mantis 35A SBEC G2 is a flat 32-bit ESC delivering 35A continuous and 45A burst on 2-4S LiPo. At 68×28×10mm and 40g with 5/6/7.4V adjustable 4A BEC, synchronous rectification, soft acceleration for EDF, and XT60 for 3D aerobatic and EDF jets.

Product Description

ZTW Mantis 35A SBEC G2 32-Bit ESC 2-4S with Adjustable BEC for 3D Aerobatic, Sport Jet and EDF RC Airplane

35A in a 10mm Flat Profile

The Mantis 35A delivers 35A continuous in the same 68×28×10mm, 40g flat housing as the 25A — a high-current, low-profile ESC for 3D aerobatic planes, sport jets, and 50-70mm EDF models with tight fuselage space.

35A Continuous / 45A Burst on 2-4S

35A sustained and 45A peak on 2-4S LiPo through 16-gauge wires drives 35mm outrunners and small EDF units with smooth, reliable power.

32-Bit Precision & Auto Timing

The 32-bit processor with automatic advance-angle identification optimizes motor efficiency and compatibility across a wide range of inrunner and outrunner motors.

Synchronous Rectification for EDF Efficiency

Synchronous rectification reduces heat and improves efficiency — particularly beneficial for EDF jets flying at sustained high throttle where ESC temperatures climb.

5/6/7.4V Adjustable 4A BEC

Selectable 5V, 6V, or 7.4V output at 4A supports both standard and HV servos in aerobatic and EDF setups.

Soft Acceleration Mode for EDF

Dedicated soft-start acceleration protects EDF drivetrains from shock loading, while normal mode delivers instant response for 3D aerobatics. RVS motor braking shortens landing rolls.

Programming & Protections

Transmitter/LCD G2/APP programming with six protection layers. Pre-soldered XT60 and 3.5mm gold bullets.

35A SBEC G2 ZTW Mantis ESC 2-4S For 3D Aerobatic Sport Jet And EDF RC Airplane

35A SBEC G2 ZTW Mantis ESC 2-4S For 3D Aerobatic Sport Jet And EDF RC Airplane

35A SBEC G2 ZTW Mantis ESC 2-4S For 3D Aerobatic Sport Jet And EDF RC Airplane


Technical Specifications

Specifications Mantis Slim 15A SBEC G2 Mantis Slim 20A SBEC G2 Mantis Slim 30A SBEC G2 Mantis 6A SBEC G2 Mantis 25A SBEC G2 Mantis 35A SBEC G2 Mantis 45A SBEC G2
Continuous Current 15A 20A 30A 6A 25A 35A 45A
Burst Current 30A 30A 40A 10A 35A 45A 55A
Input Voltage 2-4S LiPo / 5-12 NC 2-4S LiPo / 5-12 NC 2-4S LiPo / 5-12 NC 2-3S LiPo / 5-10 NC 2-4S LiPo 2-4S LiPo 2-6S LiPo
BEC Output 5V / 3A 6V / 3A 6V / 3A 5V / 3A 5.0/6.0/7.4V Adj. / 4A 5.0/6.0/7.4V Adj. / 4A 5.0/6.0/7.4V Adj. / 4A
CPU Frequency 32-bit / 96MHz 32-bit / 96MHz 32-bit / 96MHz 32-bit / 96MHz 32-bit / 96MHz 32-bit / 96MHz 32-bit / 96MHz
Programming Tx / LCD Card G2 / App Tx / LCD Card G2 / App Tx / LCD Card G2 / App Tx / LCD Card G2 / App Tx / LCD Card G2 / App Tx / LCD Card G2 / App Tx / LCD Card G2 / App
Firmware Upgrade Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported
Power Wire 20AWG 18AWG 16AWG 22AWG 18AWG 16AWG 14AWG
Motor Wire 20AWG 18AWG 16AWG 22AWG 18AWG 16AWG 14AWG
Battery Plug JST Female XT60 (Amass) XT60 (Amass) XT30 (Amass) XT60 (Amass) XT60 (Amass) XT60 (Amass)
Motor Bullet 2.0mm 2.0mm 2.0mm 2.0mm 3.5mm 3.5mm 3.5mm
Size (L×W×H) 25.5×15.0×5.0mm 38.0×16.0×10.0mm 54.0×18.0×11.0mm 25.0×15.0×6.0mm 68.0×28.0×10.0mm 68.0×28.0×10.0mm 73.0×28.0×10.0mm
Weight 10g 14g 18g 7g 36g 40g 45g


Related Products

ZTW BX 160A Single ESC 12S High Current for Large Narrow Arm High Mobility Industrial Multirotor
The ZTW BX-160A Single 12S ESC delivers 160A continuous and 180A burst on 5-12S, built for large, narrow-arm, high-mobility multirotor and industrial drone platforms. ZTW proprietary 32-bit firmware, and 10AWG wiring, it is the highest-current single ESC in the BX lineup.
80A Single ESC 12S Bidirectional DSHOT ZTW BX for 10–12 Inch Multirotor and Industrial Drone
The ZTW BX-80A Single 12S ESC is a standalone brushless controller for 10–12 inch multirotor and industrial drone platforms, delivering 80A continuous on 4-12S with a 120MHz processor, bidirectional DSHOT, and ZTW proprietary 32-bit firmware. At 20g, it offers 4-in-1 performance
ZTW BX 120A 4in1 ESC 12S 8-Layer 4oz Copper 13–18 Inch Heavy Lift Industrial Drone
The ZTW BX-120A 4-in-1 12S ESC is the flagship high-voltage FPV power controller, featuring an 8-layer 4oz copper PCB, 120A×4 continuous on 4-12S, dual 3300µF AISHI capacitors, and ZTW's proprietary 32-bit firmware. Built for 13–18 inch heavy-lift, industrial platforms.
AM32 ZTW BX 100A 4 in 1 ESC 4-8S 10kg Payload for 13–15 Inch Heavy-Lift FPV Drone
The ZTW BX-100A 4-in-1 AM32 ESC is the high-current standard-voltage flagship, delivering 100A continuous per channel on 4-8S with a 10kg payload rating for 13–15 inch heavy-lift and cinematic drones. 120MHz processing, bidirectional DSHOT, and 8AWG power leads make it ready for