Mantis Nano 80A HV OPTO G2 32 Bit Compact FPV ESC 6S-14S ZTW ESC

ZTW Mantis Nano 80A HV OPTO G2 32-Bit Compact ESC 6-14S for 90mm EDF, Sport Jet, FPV Wing and Industrial UAV

80A HV in a 77g Nano Package

The Mantis Nano 80A HV OPTO packs 80A continuous on 6-14S into a 56×31×23mm, 77g package — an exceptionally compact high-voltage ESC designed for 90mm EDF jets, sport jets, FPV wings, and industrial UAVs where space and weight are severely constrained.

80A Continuous / 100A Burst on 6-14S

80A sustained and 100A peak through 12-gauge power and 14-gauge motor wires delivers HV power to 90mm EDF units and high-KV inrunners in a footprint smaller than many 6S ESCs.

Ultra-Compact HV for Tight Installations

At less than half the weight of the Mantis 130A HV (205g) and a fraction of the size, the Nano 80A HV opens up 12-14S power for small-diameter fuselages, thin flying wings, and compact drone airframes that cannot fit a full-size HV ESC.

OPTO Isolation

Optical signal isolation prevents high-voltage electrical noise from disrupting receivers and flight controllers on 12-14S systems. No built-in BEC — pair with an external BEC or HV servos.

32-Bit Processor & Synchronous Rectification

The 32-bit 96MHz MCU with automatic motor timing delivers smooth startup, precise throttle linearity, and broad motor compatibility. Synchronous rectification maximizes efficiency in the compact package.

Firmware Upgradeable

Supports APP-based firmware updates via optional Bluetooth module, ensuring the ESC can gain new features and improvements over time.

Pre-Soldered XT90 & 4mm Bullets

Amass XT90 battery connector and 4.0mm gold bullet motor connectors come pre-soldered for fast, reliable installation. Full protection suite: start-up, over-heat, phase-loss, signal-loss, low-voltage, over-current.

Technical Specifications