6S-14S ZTW Mantis ESC Programming 130A HV OPTO G2 With Patented Cooling
The ZTW Mantis 130A HV OPTO G2 is a 32-bit HV ESC delivering 130A continuous and 150A burst on 6-14S LiPo/LiHV. At 82×49×46mm and 205g with patented hollowed airflow cooling, OPTO isolation, synchronous rectification, firmware upgrade, and XT90 for large-scale airplanes and EDF j
ZTW Mantis 130A HV OPTO G2 32-Bit ESC 6-14S with Patented Cooling for Large-Scale RC Airplane, EDF Jet and Turbine Conversion
130A 6-14S HV for Large-Scale & EDF
The Mantis 130A HV OPTO delivers 130A continuous across 6-14S LiPo/LiHV — designed for large-scale aerobatic airplanes, 120mm+ EDF jets, turbine-conversion airframes, and industrial UAV propulsion systems.
Patented Hollowed Heat Dissipation
The patented side-opening airflow structure directs strong airflow through internal channels to the ESC's middle layer — solving the problem of traditional fan cooling that only cools the surface. The result is significantly lower MOSFET temperatures under sustained HV loads.
OPTO Isolation for HV Systems
The OPTO design optically isolates the signal from the power circuit, eliminating electrical noise interference on 12-14S systems. No built-in BEC — pair with an external BEC or HV servos for clean, reliable high-voltage operation.
32-Bit Processor & Auto Timing
The 32-bit MCU with automatic motor timing identification ensures optimal efficiency across a wide range of HV inrunner and outrunner motors, with smooth startup and precise throttle linearity.
Synchronous Rectification & Kinetic Recovery
Synchronous rectification reduces heat and improves efficiency; kinetic energy recovery enhances throttle response and extends flight time on large HV airframes.
Firmware Upgrade & Real-Time Data
APP-based firmware updates and live telemetry (current, voltage, temperature, RPM, throttle) via optional Bluetooth module for monitoring high-voltage power systems.
RVS Braking & Full Protections
Motor direction switching with reverse braking, soft/normal acceleration, and six protection layers. Pre-soldered XT90 and 5.5mm gold bullets.
Technical Specifications
| Specifications | Mantis 65A SBEC G2 | Mantis 85A SBEC G2 | Mantis 105A SBEC G2 | Mantis 125A SBEC G2 | Mantis 130A HV OPTO G2 | Mantis 160A HV OPTO G2 | Mantis Nano 80A HV OPTO |
|---|---|---|---|---|---|---|---|
| Continuous Current | 65A | 85A | 105A | 125A | 130A | 160A | 80A |
| Burst Current | 75A | 95A | 115A | 135A | 150A | 180A | 100A |
| Input Voltage | 3-6S LiPo | 3-8S LiPo | 3-8S LiPo | 3-8S LiPo | 6-14S LiPo/LiHV | 6-14S LiPo/LiHV | 6-14S LiPo |
| BEC Output | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | None (OPTO) | None (OPTO) | None (OPTO) |
| CPU Frequency | 32-bit / 96MHz | 32-bit / 96MHz | 32-bit / 96MHz | 32-bit / 96MHz | 32-bit / 96MHz | 32-bit / 96MHz | 32-bit / 96MHz |
| Programming | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App |
| Firmware Upgrade | Supported | Supported | Supported | Supported | Supported | Supported | Supported |
| Power Wire | 14AWG | 12AWG | 10AWG | 10AWG | 10AWG | 10AWG | 12AWG |
| Motor Wire | 14AWG | 12AWG | 12AWG | 10AWG | 10AWG | 10AWG | 14AWG |
| Battery Plug | XT60 (Amass) | XT90 (Amass) | XT90 (Amass) | XT90 (Amass) | XT90 (Amass) | XT90 (Amass) | XT90 (Amass) |
| Motor Bullet | 3.5mm | 4.0mm | 4.0mm | 4.0mm | 5.5mm | 5.5mm | 4.0mm |
| Size (L×W×H) | 60.0×36.0×23.0mm | 88.0×38.0×24.0mm | 88.0×38.0×24.0mm | 88.0×38.0×24.0mm | 82.0×45.0×33.0mm | 82.0×45.0×33.0mm | 56.0×31.0×23.0mm |
| Weight | 60g | 107g | 114g | 127g | 205g | 209g | 77g |
Related Products
