ZX ZTW 150A ESC FOC 6S-14S High Power Industrial Cargo Drone ESC

ZTW ZX 150A FOC ESC 6-14S High-Power Industrial ESC for eVTOL, Heavy-Lift and Cargo Drones

High-Power FOC for Heavy-Lift Industrial UAVs

The ZX 150A is the high-current anchor of the 14S ZX FOC series, bringing field-oriented control efficiency to heavy-lift cargo drones, large eVTOL aircraft, and high-power fixed-wing UAVs demanding maximum powertrain efficiency.

60A Continuous / 150A Burst with FOC Efficiency

Rated at 60A sustained and 150A peak on 6-14S LiPo, this ESC leverages FOC to deliver smoother torque and higher efficiency than conventional BLDC ESCs at equivalent power levels — critical for extending endurance on heavy-lift platforms.

Heatsink-Enhanced 329g Enclosure

The 110×53×30mm aluminum-backed case provides robust thermal dissipation, managing heat from sustained high-current FOC operation without active cooling in most commercial configurations.

10-Gauge Wiring & Shielded Signal Cable

10-gauge power and motor wires (145mm) minimize voltage drop at high currents, while the 26AWG shielded signal cable (135mm) rejects electromagnetic interference in electrically dense airframes.

Parameterless Auto-Tuning

The ZX 150A automatically identifies motor parameters on startup, eliminating manual timing and throttle calibration. This is especially valuable for heavy-lift OEMs integrating large motors where improper tuning can cause instability.

UART/CAN Telemetry for Fleet Monitoring

Customizable UART and CAN bus interfaces deliver comprehensive real-time telemetry — current, voltage, temperature, RPM — enabling predictive maintenance and in-flight health monitoring for commercial drone fleets.

Splash-Proof & Firmware Upgradeable

Splash-proof construction and field-upgradable firmware ensure the ZX 150A remains reliable and current through years of heavy commercial operation.

Technical Specifications