ZTW 160A ESC HV OPTO G2 32 Bit Extra Large EDF Jet Mantis ESC
The ZTW Mantis 160A HV OPTO G2 is a 32-bit HV ESC delivering 160A continuous and 180A burst on 6-14S LiPo/LiHV. At 82×49×46mm and 209g with patented hollowed airflow cooling, OPTO isolation, synchronous rectification, firmware upgrade, and XT90 for extra-large EDF jets and giant-
ZTW Mantis 160A HV OPTO G2 32-Bit ESC 6-14S with Patented Cooling for Extra-Large EDF Jet, Giant-Scale and Industrial Propulsion
160A Flagship HV for Extreme Power
The Mantis 160A HV OPTO is the most powerful ESC in the Mantis lineup, delivering 160A continuous on 6-14S LiPo/LiHV — built for the largest EDF jets (120mm+), giant-scale 3D airplanes, competition aerobatic aircraft, and heavy-lift industrial propulsion.
160A Continuous / 180A Burst on 6-14S
160A sustained and 180A peak through 10-gauge wires drives the most powerful HV inrunners and outrunners with relentless current delivery for sustained full-throttle jet flight and giant-scale aerobatics.
Patented Hollowed Cooling Structure
The patented dual-side vent and internal airflow channel design forces cooling air through the ESC's middle layer — not just across the surface — dramatically improving heat dissipation under sustained 14S high-current operation.
OPTO Isolation for Clean HV Signal
Optical isolation separates the signal and power circuits, preventing high-voltage noise from interfering with receivers and flight controllers on 12-14S systems. Designed for use with external BEC or direct HV servo power.
32-Bit Processor & Synchronous Rectification
The 32-bit MCU with auto timing, synchronous rectification, and kinetic energy recovery delivers efficient, cool, and precise power control at extreme current levels.
Firmware Upgrade & Live Telemetry
APP firmware updates and real-time monitoring of current, voltage, temperature, RPM, and throttle — critical for managing the thermal and electrical health of 160A HV setups.
RVS Braking & Full Protections
Motor direction switching, reverse braking, soft/normal acceleration, and six protection layers. Pre-soldered XT90 and 5.5mm gold bullets.

Technical Specifications
| Specifications | Mantis 65A SBEC G2 | Mantis 85A SBEC G2 | Mantis 105A SBEC G2 | Mantis 125A SBEC G2 | Mantis 130A HV OPTO G2 | Mantis 160A HV OPTO G2 | Mantis Nano 80A HV OPTO |
|---|---|---|---|---|---|---|---|
| Continuous Current | 65A | 85A | 105A | 125A | 130A | 160A | 80A |
| Burst Current | 75A | 95A | 115A | 135A | 150A | 180A | 100A |
| Input Voltage | 3-6S LiPo | 3-8S LiPo | 3-8S LiPo | 3-8S LiPo | 6-14S LiPo/LiHV | 6-14S LiPo/LiHV | 6-14S LiPo |
| BEC Output | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | 6.0/7.4/8.4V Adj. / 8A | None (OPTO) | None (OPTO) | None (OPTO) |
| CPU Frequency | 32-bit / 96MHz | 32-bit / 96MHz | 32-bit / 96MHz | 32-bit / 96MHz | 32-bit / 96MHz | 32-bit / 96MHz | 32-bit / 96MHz |
| Programming | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App | Tx / LCD Card G2 / App |
| Firmware Upgrade | Supported | Supported | Supported | Supported | Supported | Supported | Supported |
| Power Wire | 14AWG | 12AWG | 10AWG | 10AWG | 10AWG | 10AWG | 12AWG |
| Motor Wire | 14AWG | 12AWG | 12AWG | 10AWG | 10AWG | 10AWG | 14AWG |
| Battery Plug | XT60 (Amass) | XT90 (Amass) | XT90 (Amass) | XT90 (Amass) | XT90 (Amass) | XT90 (Amass) | XT90 (Amass) |
| Motor Bullet | 3.5mm | 4.0mm | 4.0mm | 4.0mm | 5.5mm | 5.5mm | 4.0mm |
| Size (L×W×H) | 60.0×36.0×23.0mm | 88.0×38.0×24.0mm | 88.0×38.0×24.0mm | 88.0×38.0×24.0mm | 82.0×45.0×33.0mm | 82.0×45.0×33.0mm | 56.0×31.0×23.0mm |
| Weight | 60g | 107g | 114g | 127g | 205g | 209g | 77g |