Drone ESC ZTW 85A 3-6S SBEC Brushless Drone Speed Controller
The ZTW Skyhawk 85A tops the 3-6S Skyhawk line, built for higher-power fixed-wing UAVs and multirotor platforms needing sustained current. A 130A burst rating, 12-gauge wiring, and constant-speed control handle demanding long-endurance and heavy-lift missions.
DX BLDC ZTW 60A ESC 6S-14S Electronic Speed Controller With Telemetry & CAN Bus
The ZTW DX 60A BLDC ESC delivers 25A continuous and 60A burst current across 6-14S LiPo, in a compact 80×34×19.5mm, 101g frame. Built for commercial drones with 170MHz CPU, UART/CAN telemetry, firmware upgrade, and splash-proof protection.
3S-8S FPV ESC BX-F405 ZTW Speed Controller With ICM-42688-P Gyro SPL06 Baro
The ZTW BX-F405 is a Betaflight flight controller with STM32F405 MCU, ICM-42688-P gyro, SPL06 barometer, 16MB blackbox, and OSD. Features 3-8S input, dual 5V/3A & 10V/3A BEC, Type-C, DJI HD VTX support, 4 UARTs, and CRSF/SBUS/IBUS/DSM receivers for FPV racing, freestyle, and prof
ZTW 160A ESC 6-14S HV SBEC Drone Electronic Speed Controller
The ZTW Skyhawk 160A HV tops the entire Skyhawk line, built for the largest fixed-wing UAVs and heavy-lift industrial multirotor platforms. Its patented heat-dissipation structure and 6-14S HV input handle sustained, high-power long-endurance flight.
200A DX BLDC ZTW 200 Amp ESC 6S-14S UAV Drone Electronic Speed Controller
The ZTW DX 200A BLDC ESC delivers 100A continuous and 200A burst current on 6-14S LiPo. With an upgraded 105×58×30mm case, 8-gauge wiring, shielded signal cable, 170MHz CPU, UART/CAN telemetry, and splash-proofing for extreme industrial UAV platforms.
Skyhawk 155A SBEC ESC 3-8S Electronic Speed Controller For Drone
The ZTW Skyhawk 155A tops the 3-8S Skyhawk line, built for large fixed-wing UAVs and heavy-lift multirotor platforms before stepping up to the 6-14S HV models. Same 171g housing as the 125A, with more continuous current for demanding missions.
G2 120A ZTW Beatles SBEC ESC 4S-6S ESC Speed Controller For VTOL
The ZTW Beatles G2 120A is the flagship of the series, built for large-scale UAVs, heavy-lift multicopters, and high-power fixed-wing aircraft on 2-6S LiPo. 140A burst current, 10-gauge wiring, and an 8A SBEC for demanding industrial use.
High Current ZTW DX 100A BLDC ESC 6S-14S EVTOL RC Speed Controller
The ZTW DX 100A BLDC ESC delivers 60A continuous and 100A burst current for 6-14S LiPo. At 94×38×25mm and 156g with 12-gauge wiring, it pairs 170MHz processing, UART/CAN telemetry, firmware upgrade, and splash-proofing for heavy-lift commercial UAVs.
4S-6S 80A ZTW Shark G2 80 Amp ESC RC Boat ESC Drone Electronic Speed Controller
The ZTW Shark G2 80A is a 32-bit waterproof ESC delivering 80A continuous and 100A burst on 4-6S LiPo. With splash-proof glued design, flat water cooling, 5V/6V 8A SBEC, synchronous rectification, forward/reverse modes, and separate control/power boards for high-performance RC bo
ESC ZTW Skyhawk 130A 6-14S HV SBEC RC Speed Controller Adjustable
The ZTW Skyhawk 130A HV opens the high-voltage 6-14S Skyhawk line for large-scale fixed-wing UAVs and industrial multirotor platforms. Its patented hollow heat-dissipation structure and constant-speed control are built for sustained, long-endurance missions.
EVTOL 200 Amp Speed Controller 6S-20S ZTW 200A ESC ZX FOC ZTW 200 Amp ESC
The ZTW ZX 200A FOC ESC supports 6-20S LiPo with 70A continuous and 200A burst current and field-oriented control. At 148×63×40mm and 876g with 8-gauge extended wiring, shielded cable, parameterless programming, UART/CAN, and splash-proofing.
32 Bit ESC 2-3S ZTW Mantis 6A SBEC G2 With 5V/3A BEC Drone Speed Controller
The ZTW Mantis 6A SBEC G2 is a micro 32-bit ESC delivering 6A continuous and 10A burst on 2-3S LiPo. At 25×15×6mm and just 7g with 5V/3A BEC, synchronous rectification, XT30 connector, and APP/LCD programming for micro indoor and park flyer airplanes.
UAV ESC ZTW Skyhawk 65A 3-6S SBEC Brushless ESC Drone Propulsion System
The ZTW Skyhawk 65A steps up from the 35A for mid-size fixed-wing UAVs, sport-scale aircraft, and multirotor platforms. Its 100% aluminum alloy shell and new-generation MOSFETs support sustained high-load flying, backed by constant-speed control and adjustable SBEC.
6S-28S ZTW 300 Amp ESC FOC ZX 300A Large Scale UAV ESC Speed Controller
The ZTW ZX 300A FOC ESC is the series flagship, delivering 120A continuous and 300A burst current across 6-28S LiPo with field-oriented control. At 188×95×39.5mm and 1119g with 8-gauge wiring, shielded cable, parameterless programming, UART/CAN, and splash-proofing.
4S-6S ZTW Beatles ESC SBEC G2 80A RC Plane ESC Electronic Speed Controller
The ZTW Beatles G2 80A ESC steps up current headroom for civilian UAVs, VTOL aircraft, and heavy-lift multicopters on 2-6S LiPo. Thicker 12-gauge wiring and a 75g housing support sustained high-current flight beyond what the 60A can handle.
6S-14S LiPo DX 80A ESC BLDC Multirotor ESC For Industrial UAV
The ZTW DX 80A BLDC ESC provides 40A continuous and 80A burst current for 6-14S LiPo systems. Housed in the same compact 80×34×19.5mm frame as the 60A at 112g, it features 170MHz processing, UART/CAN communication, telemetry, and splash-proof protection.
