6S-14S LiPo DX 80A ESC BLDC Multirotor ESC For Industrial UAV
The ZTW DX 80A BLDC ESC provides 40A continuous and 80A burst current for 6-14S LiPo systems. Housed in the same compact 80×34×19.5mm frame as the 60A at 112g, it features 170MHz processing, UART/CAN communication, telemetry, and splash-proof protection.
ZX 60A FOC ESC 6S-14S ZTW ESC For Commercial Drones And UAV
The ZTW ZX 60A FOC ESC provides 20A continuous and 60A burst current on 6-14S LiPo with field-oriented control. Housed in an 80×34×19.5mm, 105g frame with dual signal connectors, it offers parameterless programming, UART/CAN telemetry, and splash-proof protection.
ZTW 300 Amp ESC DX BLDC ESC 6S-28S ZTW ESC 300A Ultra High Power
The ZTW DX 300A BLDC ESC is the series flagship, delivering 150A continuous and 300A burst current across 6-28S LiPo. At 188×95×39.5mm and 1119g with 8-gauge wiring, shielded cable, 170MHz CPU, UART/CAN telemetry, and splash-proofing.
DX BLDC ZTW 60A ESC 6S-14S Electronic Speed Controller With Telemetry & CAN Bus
The ZTW DX 60A BLDC ESC delivers 25A continuous and 60A burst current across 6-14S LiPo, in a compact 80×34×19.5mm, 101g frame. Built for commercial drones with 170MHz CPU, UART/CAN telemetry, firmware upgrade, and splash-proof protection.
3S-6S ZTW BX-60A 4in1 ESC BLHeli-S DShot600 ESC For 8-10 Inch FPV And 4kg Payload
The ZTW BX-60A 4in1 ESC integrates four 60A BLHeli-S ESCs (80A burst) on a single 42×41×6.5mm board. Supports 3-6S LiPo, DShot150/300/600, Oneshot and PWM, with a 6-layer 3oz copper PCB for high current handling and cooling. At 16g with 30.5mm M4 mounting for 8-10 inch FPV and mu
ZX 50A FOC ESC ZTW 6S-14S Drone Brushless Motor Controller For UAV And EVTOL
The ZTW ZX 50A FOC ESC delivers 20A continuous and 50A burst current on 6-14S LiPo with field-oriented control. At 61×34×19.5mm and 73g, it features parameterless programming, UART/CAN, telemetry, firmware upgrade, and splash-proofing for lightweight industrial drones.
ZX ZTW 150A ESC FOC 6S-14S High Power Industrial Cargo Drone ESC
The ZTW ZX 150A FOC ESC offers 60A continuous and 150A burst current on 6-14S LiPo with field-oriented control. Featuring a 110×53×30mm, 329g heatsink case, 10-gauge wiring, shielded signal cable, parameterless programming, UART/CAN, and splash-proof protection.
FOC ZTW 200A ESC Flagship FOC ZX 14S ESC For Heavy Lift Drones And EVTOL
The ZTW ZX 200A FOC ESC delivers 70A continuous and 200A burst current on 6-14S with field-oriented control. With an upgraded 105×58×30mm compact case, 8-gauge wiring, shielded cable, parameterless programming, UART/CAN telemetry, and splash-proofing.
6S-28S ZTW 300 Amp ESC FOC ZX 300A Large Scale UAV ESC Speed Controller
The ZTW ZX 300A FOC ESC is the series flagship, delivering 120A continuous and 300A burst current across 6-28S LiPo with field-oriented control. At 188×95×39.5mm and 1119g with 8-gauge wiring, shielded cable, parameterless programming, UART/CAN, and splash-proofing.
DX BLDC ZTW 150A ESC 6S-14S ESC UAV With Shielded Signal Cable
The ZTW DX 150A BLDC ESC offers 70A continuous and 150A burst current on 6-14S LiPo. Featuring a 110×53×30mm, 368g heatsink case, 10-gauge wiring, shielded signal cable, 170MHz CPU, UART/CAN telemetry, and splash-proof protection.
EVTOL 200 Amp Speed Controller 6S-20S ZTW 200A ESC ZX FOC ZTW 200 Amp ESC
The ZTW ZX 200A FOC ESC supports 6-20S LiPo with 70A continuous and 200A burst current and field-oriented control. At 148×63×40mm and 876g with 8-gauge extended wiring, shielded cable, parameterless programming, UART/CAN, and splash-proofing.
ZX FOC 80 Amp ESC 80A 6S-14S High Efficiency EVTOL ESC Controller
The ZTW ZX 80A FOC ESC delivers 30A continuous and 80A burst current on 6-14S LiPo with field-oriented control. At 80×34×19.5mm and 116g with 12-gauge wiring and dual signal connectors, it features parameterless programming, UART/CAN, and splash-proofing.
200A DX BLDC ZTW 200 Amp ESC 6S-14S UAV Drone Electronic Speed Controller
The ZTW DX 200A BLDC ESC delivers 100A continuous and 200A burst current on 6-14S LiPo. With an upgraded 105×58×30mm case, 8-gauge wiring, shielded signal cable, 170MHz CPU, UART/CAN telemetry, and splash-proofing for extreme industrial UAV platforms.
BX-80A ZTW ESC 4 In 1 BLHeli-S 3S-8S DShot600 13 Inch FPV ESC For Cinelifter
The ZTW BX-80A 4in1 ESC delivers 80A continuous and 100A burst per channel on 3-8S LiPo with BLHeli-S firmware and DShot600. Built on a 6-layer 3oz copper PCB in a 57×54×6.5mm, 25g package with 30.5mm M4 mounting and XT90 connector for 13 inch FPV long-range, cinelifter, and mult
ZTW BX-120A Drone 4 In 1 ESC BLHeli-S 3S-8S DShot600 X8 10kg Payload Multirotor ESC
The ZTW BX-120A 4in1 ESC delivers 120A continuous and 140A burst per channel on 3-8S LiPo with BLHeli-S firmware and DShot600. Built on an upgraded 8-layer 4oz copper PCB in a 57×54×6.5mm, 25g package with XT90 and 30.5mm M4 mounting for 15 inch heavy-lift, X8, and multirotors up
High Current ZTW DX 100A BLDC ESC 6S-14S EVTOL RC Speed Controller
The ZTW DX 100A BLDC ESC delivers 60A continuous and 100A burst current for 6-14S LiPo. At 94×38×25mm and 156g with 12-gauge wiring, it pairs 170MHz processing, UART/CAN telemetry, firmware upgrade, and splash-proofing for heavy-lift commercial UAVs.
Bluetooth Module Wireless ESC Programmer & Telemetry Adapter For ZTW G2 Series
The ZTW Bluetooth Module enables wireless ESC programming, real-time telemetry, and firmware updates via the ZTW iOS/Android app for Beatles, Mantis, Skyhawk, Shark, Seal, and Beast G2 ESCs. Three cable variants (Beast PRO, Beast, Airplane/Boat) share the same 25×17×9mm, 5g modul
XDFly 195A HV SBEC 32 Bit G4 6-14S ESC For 600-700 RC Helicopter
The XDFly HPRO 195A HV SBEC is a premium 32-bit G4 (170MHz) HV ESC delivering 195A continuous and 260A burst on 6-14S LiPo. At 103.5×48×25mm and 223g with 6-12V/10A BEC, RGB LED, temp-controlled fan, multi-protocol telemetry, and governor for 600-700 helis and large fixed-wing.
ZTW 160A ESC 6-14S HV SBEC Drone Electronic Speed Controller
The ZTW Skyhawk 160A HV tops the entire Skyhawk line, built for the largest fixed-wing UAVs and heavy-lift industrial multirotor platforms. Its patented heat-dissipation structure and 6-14S HV input handle sustained, high-power long-endurance flight.
6S-20S ESC Waterproof ZTW 150A ESC Dolphin FOC HV OPTO High Voltage
The ZTW Dolphin 150A FOC HV OPTO waterproof ESC supports 6-20S LiPo with 60A continuous and 150A burst current, FOC, and optocoupler isolation. At 148×63×50mm with 8-gauge wiring, shielded cable, parameterless programming, and full waterproofing for industrial underwater thruster
