ZTW 300 Amp ESC DX BLDC ESC 6S-28S ZTW ESC 300A Ultra High Power
The ZTW DX 300A BLDC ESC is the series flagship, delivering 150A continuous and 300A burst current across 6-28S LiPo. At 188×95×39.5mm and 1119g with 8-gauge wiring, shielded cable, 170MHz CPU, UART/CAN telemetry, and splash-proofing.
High Current ZTW DX 100A BLDC ESC 6S-14S EVTOL RC Speed Controller
The ZTW DX 100A BLDC ESC delivers 60A continuous and 100A burst current for 6-14S LiPo. At 94×38×25mm and 156g with 12-gauge wiring, it pairs 170MHz processing, UART/CAN telemetry, firmware upgrade, and splash-proofing for heavy-lift commercial UAVs.
200A DX BLDC ZTW 200 Amp ESC 6S-14S UAV Drone Electronic Speed Controller
The ZTW DX 200A BLDC ESC delivers 100A continuous and 200A burst current on 6-14S LiPo. With an upgraded 105×58×30mm case, 8-gauge wiring, shielded signal cable, 170MHz CPU, UART/CAN telemetry, and splash-proofing for extreme industrial UAV platforms.
DX BLDC ZTW 60A ESC 6S-14S Electronic Speed Controller With Telemetry & CAN Bus
The ZTW DX 60A BLDC ESC delivers 25A continuous and 60A burst current across 6-14S LiPo, in a compact 80×34×19.5mm, 101g frame. Built for commercial drones with 170MHz CPU, UART/CAN telemetry, firmware upgrade, and splash-proof protection.
DX BLDC ZTW 150A ESC 6S-14S ESC UAV With Shielded Signal Cable
The ZTW DX 150A BLDC ESC offers 70A continuous and 150A burst current on 6-14S LiPo. Featuring a 110×53×30mm, 368g heatsink case, 10-gauge wiring, shielded signal cable, 170MHz CPU, UART/CAN telemetry, and splash-proof protection.
ZX 50A FOC ESC ZTW 6S-14S Drone Brushless Motor Controller For UAV And EVTOL
The ZTW ZX 50A FOC ESC delivers 20A continuous and 50A burst current on 6-14S LiPo with field-oriented control. At 61×34×19.5mm and 73g, it features parameterless programming, UART/CAN, telemetry, firmware upgrade, and splash-proofing for lightweight industrial drones.
ZX ZTW 150A ESC FOC 6S-14S High Power Industrial Cargo Drone ESC
The ZTW ZX 150A FOC ESC offers 60A continuous and 150A burst current on 6-14S LiPo with field-oriented control. Featuring a 110×53×30mm, 329g heatsink case, 10-gauge wiring, shielded signal cable, parameterless programming, UART/CAN, and splash-proof protection.
6S-14S LiPo DX 80A ESC BLDC Multirotor ESC For Industrial UAV
The ZTW DX 80A BLDC ESC provides 40A continuous and 80A burst current for 6-14S LiPo systems. Housed in the same compact 80×34×19.5mm frame as the 60A at 112g, it features 170MHz processing, UART/CAN communication, telemetry, and splash-proof protection.
Dolphin 100A FOC HV OPTO Waterproof ESC ZTW 6S-14S For Precision Underwater ROV
The ZTW Dolphin 100A FOC HV OPTO waterproof ESC delivers 100A continuous and 120A burst on 6-14S LiPo with field-oriented control and optocoupler isolation. At 106×53×30mm and 597g, it features parameterless programming, shielded cable, and full waterproofing for subsea thrusters
ZX 60A FOC ESC 6S-14S ZTW ESC For Commercial Drones And UAV
The ZTW ZX 60A FOC ESC provides 20A continuous and 60A burst current on 6-14S LiPo with field-oriented control. Housed in an 80×34×19.5mm, 105g frame with dual signal connectors, it offers parameterless programming, UART/CAN telemetry, and splash-proof protection.
6S-20S ESC Waterproof ZTW 150A ESC Dolphin FOC HV OPTO High Voltage
The ZTW Dolphin 150A FOC HV OPTO waterproof ESC supports 6-20S LiPo with 60A continuous and 150A burst current, FOC, and optocoupler isolation. At 148×63×50mm with 8-gauge wiring, shielded cable, parameterless programming, and full waterproofing for industrial underwater thruster
IP67 ZTW ESC 300A Waterproof ESC 10S-20S ESC Marine Propulsion
The ZTW Dolphin 300A HV OPTO IP67 waterproof ESC delivers 300A continuous and 1200A burst current on 10-20S LiPo. At 160×110×39.5mm and 1143g with 6-gauge wiring, 5V/1A BEC, optocoupler isolation, and full IP67 waterproofing for extreme subsea propulsion.
130A ESC ZTW Dolphin HV OPTO 6S-14S LiPo Underwater ROV AUV Marine ESC
The ZTW Dolphin 130A HV OPTO waterproof ESC delivers 130A continuous and 150A burst current on 6-14S LiPo with optocoupler isolation. At 90×49×23mm and 438g with 1170mm power leads, shielded cable, and full waterproofing for subsea industrial propulsion.
6S-14S ZTW 120A ESC FOC HV OPTO Waterproof ESC Slim Profile For EFoil Propulsion
The ZTW Dolphin 120A FOC HV OPTO waterproof ESC offers 100A continuous and 120A burst on 6-14S LiPo with FOC and optocoupler isolation. Featuring a slim 105.5×53×19.5mm, 507g case, parameterless programming, shielded cable, and full waterproofing for compact subsea propulsion.
Waterproof ZTW 160A ESC Dolphin HV OPTO 6S-14S AUV Propulsion RC Marine ESC
The ZTW Dolphin 160A HV OPTO waterproof ESC provides 160A continuous and 180A burst current on 6-14S LiPo with optocoupler isolation. Sharing the 90×49×23mm footprint at 487g with 1170mm leads, shielded cable, and full waterproofing for industrial subsea thrusters.
