Results For "

drone motor esc

": 31 Products Found

Skyhawk 155A SBEC ESC 3-8S Electronic Speed Controller For Drone

The ZTW Skyhawk 155A tops the 3-8S Skyhawk line, built for large fixed-wing UAVs and heavy-lift multirotor platforms before stepping up to the 6-14S HV models. Same 171g housing as the 125A, with more continuous current for demanding missions.

Mantis Nano 80A HV OPTO G2 32 Bit Compact FPV ESC 6S-14S ZTW ESC

The ZTW Mantis Nano 80A HV OPTO G2 is an ultra-compact 32-bit HV ESC delivering 80A continuous and 100A burst on 6-14S LiPo. At just 56×31×23mm and 77g with OPTO isolation, synchronous rectification, firmware upgrade, XT90, and 4mm bullets for 90mm EDF, sport jets and space-const

4S-6S 80A ZTW Shark G2 80 Amp ESC RC Boat ESC Drone Electronic Speed Controller

The ZTW Shark G2 80A is a 32-bit waterproof ESC delivering 80A continuous and 100A burst on 4-6S LiPo. With splash-proof glued design, flat water cooling, 5V/6V 8A SBEC, synchronous rectification, forward/reverse modes, and separate control/power boards for high-performance RC bo

4S-6S ZTW Beatles ESC SBEC G2 80A RC Plane ESC Electronic Speed Controller

The ZTW Beatles G2 80A ESC steps up current headroom for civilian UAVs, VTOL aircraft, and heavy-lift multicopters on 2-6S LiPo. Thicker 12-gauge wiring and a 75g housing support sustained high-current flight beyond what the 60A can handle.

130A ESC ZTW Dolphin HV OPTO 6S-14S LiPo Underwater ROV AUV Marine ESC

The ZTW Dolphin 130A HV OPTO waterproof ESC delivers 130A continuous and 150A burst current on 6-14S LiPo with optocoupler isolation. At 90×49×23mm and 438g with 1170mm power leads, shielded cable, and full waterproofing for subsea industrial propulsion.

5V 3A BEC 15 Amp ESC ZTW Mantis Slim 15A SBEC G2 32 Bit ESC 2S-4S

The ZTW Mantis Slim 15A SBEC G2 is an ultra-thin 32-bit ESC delivering 15A continuous and 30A burst on 2-4S LiPo. At just 25.5×15×5mm and 10g with 5V/3A BEC, synchronous rectification, forward/reverse mode, and linear braking reverse for F3P indoor 3D/4D and lightweight airplanes

2S-8S ZTW UBEC 8A G2 5V 6V 7.4V 8.4V Adjustable 15A Peak RC Airplane ESC

The ZTW UBEC 8A G2 is a compact external switching BEC delivering 8A continuous and 15A peak on 2-8S LiPo input. Selectable 5V/6V/7.4V/8.4V output via DIP switch powers receivers, servos, flight controllers, and gimbal electronics. At 50×20×7mm and 14g with a JR output lead for R

32 Bit ESC 2-3S ZTW Mantis 6A SBEC G2 With 5V/3A BEC Drone Speed Controller

The ZTW Mantis 6A SBEC G2 is a micro 32-bit ESC delivering 6A continuous and 10A burst on 2-3S LiPo. At 25×15×6mm and just 7g with 5V/3A BEC, synchronous rectification, XT30 connector, and APP/LCD programming for micro indoor and park flyer airplanes.

ESC ZTW Skyhawk 130A 6-14S HV SBEC RC Speed Controller Adjustable

The ZTW Skyhawk 130A HV opens the high-voltage 6-14S Skyhawk line for large-scale fixed-wing UAVs and industrial multirotor platforms. Its patented hollow heat-dissipation structure and constant-speed control are built for sustained, long-endurance missions.

3S-14S ZTW UBEC 12A G2 External Switching BEC 5.0V-8.0V RC Helicopter ESC

The ZTW UBEC 12A G2 is a mid-range external switching BEC delivering 12A continuous and 18A peak on 3-14S LiPo input. Six selectable output voltages (5.0/5.5/6.0/6.5/7.0/8.0V) via DIP switch power receivers, HV servos, flight controllers, and gimbals. At 60×34×15mm and 51g for RC

11V-36V ZTW ESC BX-F7 FC F722 Flight Controller 216MHz With 16MB Blackbox DPS310 Baro

The ZTW BX-F7 FC is a Betaflight flight controller built around a 216MHz STM32F722 processor with ICM42688 gyro, DPS310 barometer, 16MB blackbox, and AT7456E OSD. Supports 3-8S input, dual 8K gyro/PID, solder-free modular wiring, TVS protection, and CRSF/SBUS/ELRS for FPV freesty
Previous
Page 2 of 2
Next