Results For "

esc controller

": 97 Products Found

ZTW Beast SL 50A G2 32 Bit Waterproof Sensorless ESC 2S-3S With XT60

The ZTW Beast SL 50A G2 is a 32-bit waterproof sensorless ESC delivering 50A continuous and 300A burst on 2-3S LiPo. At 48×38×32mm and 95g with pre-installed XT60 and 4.0mm bullet connectors, 6V/3A BEC, cooling fan, and LED/APP programming for 1:10 RTR.

ZTW Beast PRO 300A 12S ESC G2 BLE 32 Bit With 20A BEC Large Scale RC Car ESC

The ZTW Beast PRO 300A 12S G2 BLE is a 32-bit sensored/sensorless ESC delivering 200A continuous and 800A burst on 6-12S LiPo. At 95×64×39.5mm and 441g with 20A adjustable BEC (6-9V), built-in Bluetooth, APP tuning, and full protection for 1:5 large-scale RC.

ZTW Shark G2 30A 32 Bit ESC 4S With Water Cooling RC Boat ESC

The ZTW Shark G2 30A is a 32-bit waterproof ESC delivering 30A continuous and 40A burst on 2-4S LiPo. With splash-proof glued design, flat water cooling, 5V/6V 4A SBEC, synchronous rectification, forward/reverse modes, and separate control/power boards for RC boats and small unde

HV SBEC XDFly 300A Anti Ignition 6-12V BEC 700-800 RC Heli ESC

The XDFly HPRO 300A HV SBEC is the flagship 32-bit G4 (170MHz) HV ESC delivering 300A continuous and 400A burst on 6-14S LiPo. At 95×57×38mm and 302g with anti-ignition, 6-12V/10A BEC (35A peak), RGB LED, temp-controlled fan, and multi-protocol telemetry for 700-800 helis and lar

ESC ZTW Skyhawk 130A 6-14S HV SBEC RC Speed Controller Adjustable

The ZTW Skyhawk 130A HV opens the high-voltage 6-14S Skyhawk line for large-scale fixed-wing UAVs and industrial multirotor platforms. Its patented hollow heat-dissipation structure and constant-speed control are built for sustained, long-endurance missions.

125A 3-8S SBEC ZTW Skyhawk Brushless ESC Fixed Wing UAV VTOL RC Helicopter ESC

The ZTW Skyhawk 125A opens the 3-8S Skyhawk line for larger fixed-wing UAVs and heavier multirotor platforms. It shares its 171g, 87×40×32mm housing with the 155A, giving builders a lower-current option in the same physical footprint.

2S-3S ZTW Beast PRO 30A G2 BLE 32 Bit Sensored ESC Built In Bluetooth

The ZTW Beast PRO 30A G2 BLE is a 32-bit sensored/sensorless ESC delivering 30A continuous and 80A burst on 2-3S LiPo. At just 23×14×10mm and 8g with built-in Bluetooth, APP tuning, real-time data logging, and 6V/2A BEC — purpose-built for 1:28 mini racing and drift.

High Speed RC Boat ESC ZTW Seal 160A SBEC HV G2 32 Bit Waterproof 6-14S

The ZTW Seal 160A SBEC HV G2 is a 32-bit 170MHz waterproof ESC delivering 160A continuous and 180A burst on 6-14S LiPo. With IP67, dual water cooling, 10A SBEC, S.BUS2/CAN, forward/reverse, telemetry, and APP/LCD programming — the best-selling HV marine ESC.

Beast PRO 160A 10A G2 BLE Sensored Bluetooth ESC For Modified 1:10 Touring And Drift

The ZTW Beast PRO 160A 10A G2 BLE is a 32-bit sensored/sensorless ESC delivering 160A continuous and 760A burst on 2-3S LiPo. At 38×31×32mm and 101g with built-in Bluetooth, 10A BEC, APP tuning, and real-time data for modified racing and drift.

ZTW BX 30A 4 in 1 AM32 ESC 3S-6S Bidirectional DSHOT for 2–4 Inch FPV Drone

The ZTW BX-30A 4-in-1 AM32 ESC is built for 2–4 inch micro FPV drones, pairing a 120MHz AT32F421 processor with bidirectional DSHOT300/600 and Betaflight RPM filtering for ultra-low noise. At just 7g with a 20×20mm mounting footprint, it delivers smooth, precise throttle in a fea

ZTW BX 80A 4-in-1 AM32 ESC 4S-8S 7kg Payload for 10–13The ZTW BX-80A 4-in-1 AM32 ESC

The ZTW BX-80A 4-in-1 AM32 ESC handles 80A continuous per channel on 4-8S, rated for 7kg payload and 7–10 inch frames. With a 120MHz processor, bidirectional DSHOT, and dual 2200µF capacitors, it powers long-range, cinematic, and light industrial multirotors with confidence.

2-3S ZTW Beast PRO G2 100A ESC With 10A BEC For Buggy And Crawler

The ZTW Beast PRO 100A G2 is a 32-bit sensored/sensorless ESC delivering 100A continuous and 600A burst on 2-3S LiPo. At 38×31×32mm and 99g with 10A adjustable BEC, reverse connection protection, APP tuning, and competition parameters for 1:10 RC cars.

ZTW 60A ESC 2S-6S ZTW Beatles G2 SBEC For Fixed Wing Aircraft

The ZTW Beatles G2 60A ESC is the entry point into the 2-6S Beatles G2 line, built for civilian UAVs, VTOL aircraft, and high-power RC airplanes. 32-bit control, an 8A adjustable SBEC, and full protection circuitry in a compact 50g design.

ZTW BX 160A Single ESC 12S High Current for Large Narrow Arm High Mobility Industrial Multirotor

The ZTW BX-160A Single 12S ESC delivers 160A continuous and 180A burst on 5-12S, built for large, narrow-arm, high-mobility multirotor and industrial drone platforms. ZTW proprietary 32-bit firmware, and 10AWG wiring, it is the highest-current single ESC in the BX lineup.

Drone ESC ZTW 85A 3-6S SBEC Brushless Drone Speed Controller

The ZTW Skyhawk 85A tops the 3-6S Skyhawk line, built for higher-power fixed-wing UAVs and multirotor platforms needing sustained current. A 130A burst rating, 12-gauge wiring, and constant-speed control handle demanding long-endurance and heavy-lift missions.

80A ZTW Beast SL G2 ESC Waterproof Sensorless 2S-3S ESC For 1:10 RC SCT

The ZTW Beast SL 80A 3S G2 is a 32-bit waterproof sensorless ESC delivering 80A continuous and 520A burst on 2-3S LiPo. At 48×38×32mm and 111g with 12-gauge wiring, XT60, 4.0mm bullets, 6V/3A BEC, and cooling fan for 1:10 RC trucks.

ZTW Beast PRO 150A G2 BLE 32 Bit Sensored 2-6S ESC For 1:8 Buggy Rock Crawler

The ZTW Beast PRO 150A G2 BLE is a 32-bit sensored/sensorless ESC delivering 150A continuous and 950A burst on 2-6S LiPo. At 55×49×38mm and 167g with all-aluminum shell, built-in Bluetooth, 8A BEC, and APP tuning for 1:8 RC cars.

2S-4S ESC ZTW Beast PRO 220A G2 BLE 32 Bit Sensored Racing ESC

The ZTW Beast PRO 220A G2 BLE is a 32-bit sensored/sensorless ESC delivering 220A continuous and 1000A burst on 2-4S LiPo. At 55×40×36mm and 165g with all-aluminum shell, built-in Bluetooth, 10A BEC, and APP tuning for 1:8 racing.

3-6S G4 XDFly 85A SBEC 32 Bit ESC For 380-420 RC Helicopter EDF

The XDFly HPRO 85A SBEC is a premium 32-bit G4 (170MHz) ESC delivering 85A continuous and 160A burst on 3-6S LiPo. At 70×36×21mm and 93g with 6-12V/10A adjustable BEC, multi-protocol telemetry, governor mode, and XT60 for 380-420 helis and high-power fixed-wing.

350A HV SBEC G2 ZTW Seal ESC With 12V SBEC For Industrial Marine Propulsion

The ZTW Seal 350A HV SBEC G2 is the 32-bit 170MHz series flagship, delivering 350A continuous and 450A burst on 6-14S LiPo. With IP67, dual water cooling, 10A SBEC (6-12V), forward/reverse, telemetry, and APP/LCD programming for extreme marine propulsion.