Results For "

esc controller

": 89 Products Found

BX-80A ZTW ESC 4 In 1 BLHeli-S 3S-8S DShot600 13 Inch FPV ESC For Cinelifter

The ZTW BX-80A 4in1 ESC delivers 80A continuous and 100A burst per channel on 3-8S LiPo with BLHeli-S firmware and DShot600. Built on a 6-layer 3oz copper PCB in a 57×54×6.5mm, 25g package with 30.5mm M4 mounting and XT90 connector for 13 inch FPV long-range, cinelifter, and mult

High Current ZTW DX 100A BLDC ESC 6S-14S EVTOL RC Speed Controller

The ZTW DX 100A BLDC ESC delivers 60A continuous and 100A burst current for 6-14S LiPo. At 94×38×25mm and 156g with 12-gauge wiring, it pairs 170MHz processing, UART/CAN telemetry, firmware upgrade, and splash-proofing for heavy-lift commercial UAVs.

ZTW BX-120A Drone 4 In 1 ESC BLHeli-S 3S-8S DShot600 X8 10kg Payload Multirotor ESC

The ZTW BX-120A 4in1 ESC delivers 120A continuous and 140A burst per channel on 3-8S LiPo with BLHeli-S firmware and DShot600. Built on an upgraded 8-layer 4oz copper PCB in a 57×54×6.5mm, 25g package with XT90 and 30.5mm M4 mounting for 15 inch heavy-lift, X8, and multirotors up

3S-8S FPV ESC BX-F405 ZTW Speed Controller With ICM-42688-P Gyro SPL06 Baro

The ZTW BX-F405 is a Betaflight flight controller with STM32F405 MCU, ICM-42688-P gyro, SPL06 barometer, 16MB blackbox, and OSD. Features 3-8S input, dual 5V/3A & 10V/3A BEC, Type-C, DJI HD VTX support, 4 UARTs, and CRSF/SBUS/IBUS/DSM receivers for FPV racing, freestyle, and prof

11V-36V ZTW ESC BX-F7 FC F722 Flight Controller 216MHz With 16MB Blackbox DPS310 Baro

The ZTW BX-F7 FC is a Betaflight flight controller built around a 216MHz STM32F722 processor with ICM42688 gyro, DPS310 barometer, 16MB blackbox, and AT7456E OSD. Supports 3-8S input, dual 8K gyro/PID, solder-free modular wiring, TVS protection, and CRSF/SBUS/ELRS for FPV freesty

6S-20S ESC Waterproof ZTW 150A ESC Dolphin FOC HV OPTO High Voltage

The ZTW Dolphin 150A FOC HV OPTO waterproof ESC supports 6-20S LiPo with 60A continuous and 150A burst current, FOC, and optocoupler isolation. At 148×63×50mm with 8-gauge wiring, shielded cable, parameterless programming, and full waterproofing for industrial underwater thruster

XDFly 195A HV SBEC 32 Bit G4 6-14S ESC For 600-700 RC Helicopter

The XDFly HPRO 195A HV SBEC is a premium 32-bit G4 (170MHz) HV ESC delivering 195A continuous and 260A burst on 6-14S LiPo. At 103.5×48×25mm and 223g with 6-12V/10A BEC, RGB LED, temp-controlled fan, multi-protocol telemetry, and governor for 600-700 helis and large fixed-wing.

ZTW 160A ESC 6-14S HV SBEC Drone Electronic Speed Controller

The ZTW Skyhawk 160A HV tops the entire Skyhawk line, built for the largest fixed-wing UAVs and heavy-lift industrial multirotor platforms. Its patented heat-dissipation structure and 6-14S HV input handle sustained, high-power long-endurance flight.

IP67 ZTW ESC 300A Waterproof ESC 10S-20S ESC Marine Propulsion

The ZTW Dolphin 300A HV OPTO IP67 waterproof ESC delivers 300A continuous and 1200A burst current on 10-20S LiPo. At 160×110×39.5mm and 1143g with 6-gauge wiring, 5V/1A BEC, optocoupler isolation, and full IP67 waterproofing for extreme subsea propulsion.

125A XDFly ESC 32 Bit G4 3-8S Temp Controlled Fan 500-550 RC Helicopter ESC

The XDFly HPRO 125A SBEC is a premium 32-bit G4 (170MHz) ESC delivering 125A continuous and 200A burst on 3-8S LiPo. At 90×43×25mm and 158g with 6-12V/10A BEC, RGB status LED, temp-controlled fan, multi-protocol telemetry, and governor for 500-550 helis and .90 fixed-wing.

G2 20A ZTW Shark ESC Waterproof ESC 2S-4S SBEC For Light Underwater Thrusters

The ZTW Shark G2 20A is a 32-bit waterproof ESC delivering 20A continuous and 30A burst on 2-4S LiPo. With splash-proof glued design, flat water cooling, 5V/6V 4A SBEC, synchronous rectification, forward/reverse modes, and separate control/power boards for RC boats and small unde

Dolphin 100A FOC HV OPTO Waterproof ESC ZTW 6S-14S For Precision Underwater ROV

The ZTW Dolphin 100A FOC HV OPTO waterproof ESC delivers 100A continuous and 120A burst on 6-14S LiPo with field-oriented control and optocoupler isolation. At 106×53×30mm and 597g, it features parameterless programming, shielded cable, and full waterproofing for subsea thrusters

Multifunctional ZTW LCD Program Card G2 ZTW ESC Programming Card

The ZTW LCD Program Card G2 is a 6-in-1 tool for ZTW G2 ESCs: standalone ESC programmer, LiPo cell voltmeter, real-time telemetry display (voltage, current, RPM, temp), data log reader, PWM signal detector, and ESC/servo tester. Compatible with Beatles, Mantis, Skyhawk, Shark, an

IP67 ZTW Seal 300A ESC HV OPTO G2 32 Bit ESC 6S-14S Opto Isolated

The ZTW Seal 300A HV OPTO G2 is a 32-bit 170MHz opto-isolated waterproof ESC delivering 300A continuous and 320A burst on 6-14S LiPo. With IP67, dual water cooling, no BEC, S.BUS2/CAN, forward/reverse, telemetry, and APP/LCD programming for industrial subsea use.

130A ESC ZTW Dolphin HV OPTO 6S-14S LiPo Underwater ROV AUV Marine ESC

The ZTW Dolphin 130A HV OPTO waterproof ESC delivers 130A continuous and 150A burst current on 6-14S LiPo with optocoupler isolation. At 90×49×23mm and 438g with 1170mm power leads, shielded cable, and full waterproofing for subsea industrial propulsion.

6S-14S ZTW 120A ESC FOC HV OPTO Waterproof ESC Slim Profile For EFoil Propulsion

The ZTW Dolphin 120A FOC HV OPTO waterproof ESC offers 100A continuous and 120A burst on 6-14S LiPo with FOC and optocoupler isolation. Featuring a slim 105.5×53×19.5mm, 507g case, parameterless programming, shielded cable, and full waterproofing for compact subsea propulsion.

Waterproof ZTW 160A ESC Dolphin HV OPTO 6S-14S AUV Propulsion RC Marine ESC

The ZTW Dolphin 160A HV OPTO waterproof ESC provides 160A continuous and 180A burst current on 6-14S LiPo with optocoupler isolation. Sharing the 90×49×23mm footprint at 487g with 1170mm leads, shielded cable, and full waterproofing for industrial subsea thrusters.

HPRO XDFly 155A SBEC G4 3-8S ESC With RGB F3C And 2m F3A Fixed Wing ESC

The XDFly HPRO 155A SBEC is a premium 32-bit G4 (170MHz) ESC delivering 155A continuous and 260A burst on 3-8S LiPo. At 90×43×25mm and 158g with 6-12V/10A BEC, RGB LED, temp-controlled fan, multi-protocol telemetry, and governor for 550-580 helis and F3C/F3A fixed-wing.

UAV ESC ZTW Skyhawk 65A 3-6S SBEC Brushless ESC Drone Propulsion System

The ZTW Skyhawk 65A steps up from the 35A for mid-size fixed-wing UAVs, sport-scale aircraft, and multirotor platforms. Its 100% aluminum alloy shell and new-generation MOSFETs support sustained high-load flying, backed by constant-speed control and adjustable SBEC.

1S Pan Car ESC ZTW Beast PRO 100A Mini 1S G2 32 Bit Sensored ESC

The ZTW Beast PRO 100A Mini 1S G2 is a 32-bit sensored/sensorless ESC delivering 100A continuous and 360A burst on 1S LiPo. At 31.5×25×16mm and 48g with 7A adjustable BEC, APP tuning, and ultra-slim profile for 1S pan car and F1 racing.