ZX ZTW 150A ESC FOC 6S-14S High Power Industrial Cargo Drone ESC
The ZTW ZX 150A FOC ESC offers 60A continuous and 150A burst current on 6-14S LiPo with field-oriented control. Featuring a 110×53×30mm, 329g heatsink case, 10-gauge wiring, shielded signal cable, parameterless programming, UART/CAN, and splash-proof protection.
DX BLDC ZTW 150A ESC 6S-14S ESC UAV With Shielded Signal Cable
The ZTW DX 150A BLDC ESC offers 70A continuous and 150A burst current on 6-14S LiPo. Featuring a 110×53×30mm, 368g heatsink case, 10-gauge wiring, shielded signal cable, 170MHz CPU, UART/CAN telemetry, and splash-proof protection.
6S-20S ESC Waterproof ZTW 150A ESC Dolphin FOC HV OPTO High Voltage
The ZTW Dolphin 150A FOC HV OPTO waterproof ESC supports 6-20S LiPo with 60A continuous and 150A burst current, FOC, and optocoupler isolation. At 148×63×50mm with 8-gauge wiring, shielded cable, parameterless programming, and full waterproofing for industrial underwater thruster
150A ZTW Beast ESC 32 Bit Waterproof Sensorless 2S-6S ESC Controller
The ZTW Beast SL 150A G2 is a 32-bit waterproof sensorless ESC delivering 150A continuous and 1080A burst on 2-6S LiPo. At 55×48×37mm and 165g with 10-gauge wiring, XT90, 5.0mm bullets, 6/7.4V 6A adjustable BEC, and cooling fan for 1:8 RC.
DX BLDC ZTW 60A ESC 6S-14S Electronic Speed Controller With Telemetry & CAN Bus
The ZTW DX 60A BLDC ESC delivers 25A continuous and 60A burst current across 6-14S LiPo, in a compact 80×34×19.5mm, 101g frame. Built for commercial drones with 170MHz CPU, UART/CAN telemetry, firmware upgrade, and splash-proof protection.
EVTOL 200 Amp Speed Controller 6S-20S ZTW 200A ESC ZX FOC ZTW 200 Amp ESC
The ZTW ZX 200A FOC ESC supports 6-20S LiPo with 70A continuous and 200A burst current and field-oriented control. At 148×63×40mm and 876g with 8-gauge extended wiring, shielded cable, parameterless programming, UART/CAN, and splash-proofing.
6S-14S ZTW Mantis ESC Programming 130A HV OPTO G2 With Patented Cooling
The ZTW Mantis 130A HV OPTO G2 is a 32-bit HV ESC delivering 130A continuous and 150A burst on 6-14S LiPo/LiHV. At 82×49×46mm and 205g with patented hollowed airflow cooling, OPTO isolation, synchronous rectification, firmware upgrade, and XT90 for large-scale airplanes and EDF j
FOC ZTW 200A ESC Flagship FOC ZX 14S ESC For Heavy Lift Drones And EVTOL
The ZTW ZX 200A FOC ESC delivers 70A continuous and 200A burst current on 6-14S with field-oriented control. With an upgraded 105×58×30mm compact case, 8-gauge wiring, shielded cable, parameterless programming, UART/CAN telemetry, and splash-proofing.
6S-14S ZTW 120A ESC FOC HV OPTO Waterproof ESC Slim Profile For EFoil Propulsion
The ZTW Dolphin 120A FOC HV OPTO waterproof ESC offers 100A continuous and 120A burst on 6-14S LiPo with FOC and optocoupler isolation. Featuring a slim 105.5×53×19.5mm, 507g case, parameterless programming, shielded cable, and full waterproofing for compact subsea propulsion.
Waterproof ZTW 160A ESC Dolphin HV OPTO 6S-14S AUV Propulsion RC Marine ESC
The ZTW Dolphin 160A HV OPTO waterproof ESC provides 160A continuous and 180A burst current on 6-14S LiPo with optocoupler isolation. Sharing the 90×49×23mm footprint at 487g with 1170mm leads, shielded cable, and full waterproofing for industrial subsea thrusters.
ZTW 160A ESC 6-14S HV SBEC Drone Electronic Speed Controller
The ZTW Skyhawk 160A HV tops the entire Skyhawk line, built for the largest fixed-wing UAVs and heavy-lift industrial multirotor platforms. Its patented heat-dissipation structure and 6-14S HV input handle sustained, high-power long-endurance flight.
Beast SL ZTW 60A ESC G2 32 Bit Waterproof ESC Sensorless 2S-3S
The ZTW Beast SL 60A G2 is a 32-bit waterproof sensorless ESC delivering 60A continuous and 390A burst on 2-3S LiPo. At 48×38×32mm and 96g with XT60 and 4.0mm bullet connectors, 6V/3A BEC, cooling fan, and LED/APP programming for 1:10 RC cars.
350A HV SBEC G2 ZTW Seal ESC With 12V SBEC For Industrial Marine Propulsion
The ZTW Seal 350A HV SBEC G2 is the 32-bit 170MHz series flagship, delivering 350A continuous and 450A burst on 6-14S LiPo. With IP67, dual water cooling, 10A SBEC (6-12V), forward/reverse, telemetry, and APP/LCD programming for extreme marine propulsion.
ZTW 160A ESC HV OPTO G2 32 Bit Extra Large EDF Jet Mantis ESC
The ZTW Mantis 160A HV OPTO G2 is a 32-bit HV ESC delivering 160A continuous and 180A burst on 6-14S LiPo/LiHV. At 82×49×46mm and 209g with patented hollowed airflow cooling, OPTO isolation, synchronous rectification, firmware upgrade, and XT90 for extra-large EDF jets and giant-
8A BEC ZTW Mantis 125A SBEC G2 For 110mm EDF Giant 3D Competition RC Airplane
The ZTW Mantis 125A SBEC G2 is a 32-bit ESC delivering 125A continuous and 135A burst on 3-8S LiPo. At 88×38×24mm and 127g with 6/7.4/8.4V adjustable 8A BEC, synchronous rectification, firmware upgrade, real-time data, and XT90 for 110mm EDF and giant-scale 3D airplanes.
130A ESC ZTW Dolphin HV OPTO 6S-14S LiPo Underwater ROV AUV Marine ESC
The ZTW Dolphin 130A HV OPTO waterproof ESC delivers 130A continuous and 150A burst current on 6-14S LiPo with optocoupler isolation. At 90×49×23mm and 438g with 1170mm power leads, shielded cable, and full waterproofing for subsea industrial propulsion.
ZTW 300 Amp ESC DX BLDC ESC 6S-28S ZTW ESC 300A Ultra High Power
The ZTW DX 300A BLDC ESC is the series flagship, delivering 150A continuous and 300A burst current across 6-28S LiPo. At 188×95×39.5mm and 1119g with 8-gauge wiring, shielded cable, 170MHz CPU, UART/CAN telemetry, and splash-proofing.
ZTW Beast PRO 150A G2 BLE 32 Bit Sensored 2-6S ESC For 1:8 Buggy Rock Crawler
The ZTW Beast PRO 150A G2 BLE is a 32-bit sensored/sensorless ESC delivering 150A continuous and 950A burst on 2-6S LiPo. At 55×49×38mm and 167g with all-aluminum shell, built-in Bluetooth, 8A BEC, and APP tuning for 1:8 RC cars.
200A DX BLDC ZTW 200 Amp ESC 6S-14S UAV Drone Electronic Speed Controller
The ZTW DX 200A BLDC ESC delivers 100A continuous and 200A burst current on 6-14S LiPo. With an upgraded 105×58×30mm case, 8-gauge wiring, shielded signal cable, 170MHz CPU, UART/CAN telemetry, and splash-proofing for extreme industrial UAV platforms.
High Current ZTW DX 100A BLDC ESC 6S-14S EVTOL RC Speed Controller
The ZTW DX 100A BLDC ESC delivers 60A continuous and 100A burst current for 6-14S LiPo. At 94×38×25mm and 156g with 12-gauge wiring, it pairs 170MHz processing, UART/CAN telemetry, firmware upgrade, and splash-proofing for heavy-lift commercial UAVs.
