Quality Large Scale Airplane And UAV ZTW Backup Capacitor 60F 6V-8.4V 25A factory
Quality Large Scale Airplane And UAV ZTW Backup Capacitor 60F 6V-8.4V 25A factory
Quality Large Scale Airplane And UAV ZTW Backup Capacitor 60F 6V-8.4V 25A factory
Quality Large Scale Airplane And UAV ZTW Backup Capacitor 60F 6V-8.4V 25A factory

Large Scale Airplane And UAV ZTW Backup Capacitor 60F 6V-8.4V 25A

Large Scale Airplane And UAV ZTW Backup Capacitor 60F 6V-8.4V 25A
Product Name: Backup Capacitor 60F
BEC: 6V-8.4V (MAX 9V)
Signal Wires: 60C 150mm Brown /Red/Orange JR
Weight: 60g
Size: 60*50*23mm
Product Summary

The ZTW Backup Capacitor 60F offers over double the reserve of the 25F, automatically powering receivers and servos on BEC failure for extended safe-landing time. Supports 6V-8.4V (max 9V), 25A output, switch or throttle activation. At 60×50×23mm and 60g for large helicopters.

Product Description

ZTW Backup Capacitor 60F 6V-8.4V 25A High-Capacity Receiver Power Backup for Large RC Helicopter, Scale Airplane and UAV

60 Farad for Extended Backup Time

With more than double the capacitance of the 25F, the 60F provides significantly longer backup runtime — up to 60 seconds or more depending on servo load — giving pilots of large, complex models ample time to autorotate, glide, or execute a controlled descent.

Automatic Power Takeover

The capacitor bank instantly bridges any BEC dropout, battery failure, or wiring fault, maintaining uninterrupted power to the receiver, gyros, and servos so control is never lost at a critical moment.

6V-8.4V for HV 2S Systems

Rated for 6V to 8.4V input (max 9V), matching 2S LiFe/LiHV and 7.4V/8.4V high-voltage BEC setups on 550-800 class helicopters and large-scale airplanes.

25A Servo Current Handling

Delivers up to 25A instantaneous output to cover simultaneous high-torque servo draws on models with multiple large digital servos, such as scale warbirds with retracts and flaps or aerobatic helicopters.

Switch or Throttle Activation

The orange signal wire supports manual switch arming or automatic throttle-signal detection (50-600Hz), giving pilots a choice of fail-safe activation logic.

Built for Large Models

At 60×50×23mm and 60g, the 60F is sized for large airframes where the extra weight is negligible but the extended backup time is essential. The 60-core JR lead handles high servo currents.

Mission-Critical Redundancy

For professional UAVs, aerial photography platforms, and industrial rotorcraft carrying expensive payloads, the 60F provides a substantial power buffer against BEC failure — protecting both the airframe and the equipment it carries.

Related Products

ZTW BX-120A Drone 4 In 1 ESC BLHeli-S 3S-8S DShot600 X8 10kg Payload Multirotor ESC
The ZTW BX-120A 4in1 ESC delivers 120A continuous and 140A burst per channel on 3-8S LiPo with BLHeli-S firmware and DShot600. Built on an upgraded 8-layer 4oz copper PCB in a 57×54×6.5mm, 25g package with XT90 and 30.5mm M4 mounting for 15 inch heavy-lift, X8, and multirotors up
BX-80A ZTW ESC 4 In 1 BLHeli-S 3S-8S DShot600 13 Inch FPV ESC For Cinelifter
The ZTW BX-80A 4in1 ESC delivers 80A continuous and 100A burst per channel on 3-8S LiPo with BLHeli-S firmware and DShot600. Built on a 6-layer 3oz copper PCB in a 57×54×6.5mm, 25g package with 30.5mm M4 mounting and XT90 connector for 13 inch FPV long-range, cinelifter, and mult
G2 120A ZTW Beatles SBEC ESC 4S-6S ESC Speed Controller For VTOL
The ZTW Beatles G2 120A is the flagship of the series, built for large-scale UAVs, heavy-lift multicopters, and high-power fixed-wing aircraft on 2-6S LiPo. 140A burst current, 10-gauge wiring, and an 8A SBEC for demanding industrial use.
G2 100A ZTW Beatles 4S-6S SBEC ESC Controller Adjustable BEC
The ZTW Beatles G2 100A ESC is the second-highest current option in the series, built for heavy-lift UAVs, large fixed-wing aircraft, and industrial platforms on 2-6S LiPo. 10-gauge power wiring and an 8A SBEC support demanding, sustained loads.