65A SBEC G2 Mantis ESC 32 Bit ZTW ESC 3-6S Firmware Upgrade
The ZTW Mantis 65A SBEC G2 is a 32-bit ESC delivering 65A continuous and 75A burst on 3-6S LiPo. At 60×36×23mm and 60g with 6/7.4/8.4V adjustable 8A BEC, synchronous rectification, firmware upgrade, real-time data, and XT60 for .46-.55 3D and 90mm EDF.
XDFly 195A HV SBEC 32 Bit G4 6-14S ESC For 600-700 RC Helicopter
The XDFly HPRO 195A HV SBEC is a premium 32-bit G4 (170MHz) HV ESC delivering 195A continuous and 260A burst on 6-14S LiPo. At 103.5×48×25mm and 223g with 6-12V/10A BEC, RGB LED, temp-controlled fan, multi-protocol telemetry, and governor for 600-700 helis and large fixed-wing.
ZTW 160A ESC 6-14S HV SBEC Drone Electronic Speed Controller
The ZTW Skyhawk 160A HV tops the entire Skyhawk line, built for the largest fixed-wing UAVs and heavy-lift industrial multirotor platforms. Its patented heat-dissipation structure and 6-14S HV input handle sustained, high-power long-endurance flight.
6S-14S ZTW Mantis ESC Programming 130A HV OPTO G2 With Patented Cooling
The ZTW Mantis 130A HV OPTO G2 is a 32-bit HV ESC delivering 130A continuous and 150A burst on 6-14S LiPo/LiHV. At 82×49×46mm and 205g with patented hollowed airflow cooling, OPTO isolation, synchronous rectification, firmware upgrade, and XT90 for large-scale airplanes and EDF j
UAV ESC ZTW Skyhawk 65A 3-6S SBEC Brushless ESC Drone Propulsion System
The ZTW Skyhawk 65A steps up from the 35A for mid-size fixed-wing UAVs, sport-scale aircraft, and multirotor platforms. Its 100% aluminum alloy shell and new-generation MOSFETs support sustained high-load flying, backed by constant-speed control and adjustable SBEC.
Drone ESC ZTW 85A 3-6S SBEC Brushless Drone Speed Controller
The ZTW Skyhawk 85A tops the 3-6S Skyhawk line, built for higher-power fixed-wing UAVs and multirotor platforms needing sustained current. A 130A burst rating, 12-gauge wiring, and constant-speed control handle demanding long-endurance and heavy-lift missions.
XDFly ESC HPRO 35A SBEC G4 3S-6S 6V-12V BEC 250-300 RC Helicopter ESC
The XDFly HPRO 35A SBEC is a premium 32-bit G4 (170MHz) ESC delivering 35A continuous and 55A burst on 3-6S LiPo. At 48×25×16mm and 42g with 6-12V/8A adjustable BEC, multi-protocol telemetry, governor mode, and self-check protection for 250-300 helis and fixed-wing.
Skyhawk 35A 3-6S SBEC ZTW ESC Fixed Wing ESC For UAV VTOL RC Helicopter
The ZTW Skyhawk 35A opens the Skyhawk line, built for small fixed-wing UAVs, sport aircraft, and entry-level multirotor platforms. A 32-bit, 170MHz processor and new-generation MOSFETs deliver precise constant-speed control in a 45g, aluminum-shell ESC with adjustable SBEC.
XDFly 65A SBEC 32 Bit G4 ESC 3S-6S With 6-12V BEC F3A 3D Fixed Wing ESC
The XDFly HPRO 65A SBEC is a premium 32-bit G4 (170MHz) ESC delivering 65A continuous and 130A burst on 3-6S LiPo. At 60×36×19mm and 63g with 6-12V/10A adjustable BEC, multi-protocol telemetry, governor mode, and XT60 connector for 325-380 helis and fixed-wing.
ESC ZTW Skyhawk 130A 6-14S HV SBEC RC Speed Controller Adjustable
The ZTW Skyhawk 130A HV opens the high-voltage 6-14S Skyhawk line for large-scale fixed-wing UAVs and industrial multirotor platforms. Its patented hollow heat-dissipation structure and constant-speed control are built for sustained, long-endurance missions.
HV SBEC XDFly 300A Anti Ignition 6-12V BEC 700-800 RC Heli ESC
The XDFly HPRO 300A HV SBEC is the flagship 32-bit G4 (170MHz) HV ESC delivering 300A continuous and 400A burst on 6-14S LiPo. At 95×57×38mm and 302g with anti-ignition, 6-12V/10A BEC (35A peak), RGB LED, temp-controlled fan, and multi-protocol telemetry for 700-800 helis and lar
3-6S G4 XDFly 85A SBEC 32 Bit ESC For 380-420 RC Helicopter EDF
The XDFly HPRO 85A SBEC is a premium 32-bit G4 (170MHz) ESC delivering 85A continuous and 160A burst on 3-6S LiPo. At 70×36×21mm and 93g with 6-12V/10A adjustable BEC, multi-protocol telemetry, governor mode, and XT60 for 380-420 helis and high-power fixed-wing.
5.2V-12V ZTW UBEC 30A HV External Switching BEC 3S-18S Helicopter ESC Controller
The ZTW UBEC 30A HV is a high-current external switching BEC with 3-18S main and 1-2S backup inputs, delivering 30A continuous and 60A peak. Selectable 5.2V/6V/7.4V/8.4V/9V/12V output via DIP switch, 8-channel parallel outputs, metal housing, external switch, and full protection
8A BEC ZTW Mantis 125A SBEC G2 For 110mm EDF Giant 3D Competition RC Airplane
The ZTW Mantis 125A SBEC G2 is a 32-bit ESC delivering 125A continuous and 135A burst on 3-8S LiPo. At 88×38×24mm and 127g with 6/7.4/8.4V adjustable 8A BEC, synchronous rectification, firmware upgrade, real-time data, and XT90 for 110mm EDF and giant-scale 3D airplanes.
